The easiest to install Fuseblock just got a little easier!
This wiring harness kit comes with everything you’ll need to connect the Fuzeblock FZ-1 to your bike instead of you having to create one from scratch. In the kit you’ll get your 12v+, your ground, and your switched wire in 6′ lengths so you can reach any spot on the bike.
All of the terminals are already crimped onto the wire and the power wire has an in-line fuse to help protect your installation. A Posi-Tap connector is included so you can tap into the switched wire on your bike easily. To clean it all up you also get some protective webbing sheath for the wires.
And, although the wires aren’t Red, White, and Blue, the FZW-1 is made right here in the USA.